Waag Academy Masterclass: 3 days of Fablab Winter School 3D

3D printing: learn to print and make your own 3D printer

Fablab Amsterdam offers you the opportunity to build your personal 3D printer and learn all there is to know about 3D printing. In three days you will master the essence of 3D modeling skills, and build your own 3D printer to take home. After an introduction of the Fablab and the basics of 3D printing, you will learn how to set up a model for printing and build your own printer; a model based on Orca (RepRap Mendel). On the last day of the Winter School you will be using your own printer and get a hands-on troubleshooting course on operating your 3D printer.

Why join the Fablab Winter School?

Learn to model 3D for 3D printing;
Learn how to use the 3D printer;
Make your own 3D printer and take it home.

For whom?
The Masterclass is interesting for everyone who wants to make prototypes or 3D products at home. From architects and industrial designers to developers and high-tech hobbyists. Please note that some basic skills and knowledge on 3D modeling are required. We ask you to bring your own laptop and a 3D model that you would like to print.

The full Masterclass (3 days), including all material for the 3D printer, course materials and lunch, costs € 1.512,50,- inc. VAT per person.

2 persons:
Want to build a printer together? No problem, the price for 2 persons including the parts for one printer is € 1.875, 50- inc. VAT.

3D modeling:
If you only want to learn more about 3D modeling, you can register for only the first day. The price is € 181,50- inc. VAT per person. Please send us an e-mail at events@waag.org.

After you registered for the Fablab Winter School below, you will receive an invoice. This invoice has to be paid before the Winter School starts. A maximum of 16 participants can take part of the Fablab Winter School. The Winter School will only take place with a minimum of 10 participants.

Please register before November 9, 2012. If we do not reach the minimum number of participants, you will be notified the week before the 30th.

The Masterclass takes place on:

Day 1
Friday November 30, 2012
10:00 – 17:00 hrs
3D modeling

Day 2 & 3
Friday December 14 and Saturday December 15, 2012
10:00 – 17:00 hrs
Build your personal 3D printer

Fablab Amsterdam
Nieuwmarkt 4
1012 CR Amsterdam

Register now here!

Source: Waag.org


Leave a Reply

Your email address will not be published.