Previous editions 3D Printing Post Processing Conference

overview

April 2019

On April 16 and 17, 2019, Brightlands Chemelot Campus in Sittard-Geleen, The Netherlands, hosted a two-day 3D Printing Event covering the entire Additive Manufacturing value chain, from 3D Printing design to factory integration and post-processing.

The event included five dedicated conferences, where over 30 speakers from reputed companies and research institutions shared their views, and a two day-expo. Read more

December 2018

On December 4, 2018, Brightlands Chemelot Campus in Sittard-Geleen hosted two half-day conferences focused on Additive Manufacturing.

In the morning, during 3D Printing Post-Processing Conference, speakers from ION, AMT, Quintus Technologies, PostProcess Technologies and Fraunhofer IPT talked about various aspects related to the often overlooked third step in 3D printing: post-processing. Read more

On December 4, 2018, Brightlands Chemelot Campus in Sittard-Geleen hosted two half-day conferences focused on Additive Manufacturing.
In the morning, during 3D Printing Post-Processing Conference, speakers from ION, AMT, Quintus Technologies, PostProcess Technologies and Fraunhofer IPT talked about various aspects related to the often overlooked third step in 3D printing: post-processing.

The talks covered issues, solutions and future trends. The presentation titles included: What kind of Surface Technology is asked for 3D-Metal-Printed items | Finishing the Job – Automated Post Processing for 3D Printed Parts | Digitized 3D Post-Printing to Enable Additive Manufacturing at Scale | Shortening the post processing chain though use of high pressure heat treatment | Advanced Manufacturing with 3D printing – Process chains of tomorrow.

In the afternoon, AM Integrated Factory Conference focused on current developments in further integration of Additive Manufacturing in production processes. Speakers from Siemens Industry Software, Sirris, TNO, Authentise and AM-Flow talked about Industrial AM for functional parts, Industrializing Additive Manufacturing, Scaling up 3D printing production with automated sorting, to mention only a few presentation titles.

Below you can see the complete program of the day.

https://www.3dprintingevent.com/wp-content/uploads/2019/11/3d-printing-postprocessing-conference-360×125.jpg
09:00 09:30 Welcome and Registration
09:30 10:00 Egbert Stremmelaar, Managing Director,
Vereniging Industrieel Oppervlaktebehandelend Nederland (ION), The Netherlands, on “What kind of Surface Technology is asked for 3D-Metal-Printed items”, More information
ion program
10:00 10:30 joseph crabtree program Joseph Crabtree, Founder & CEO, Additive Manufacturing Technologies (AMT), United Kingdom, on “Finishing the Job – Automated Post Processing for 3D Printed Parts”, More information amtechnologies logo program
10:30 11:00 Coffee Break
11:00 11:30 Bruno Bourguet Bruno Bourguet, Managing Director, PostProcess Technologies, USA, on “Digitized 3D Post-Printing to Enable Additive Manufacturing at Scale”, More information postprocess logo program
11:30 12:00 james jim shipley program James Shipley, Global Business Development Manager Advanced Material Densification, Quintus Technologies, Sweden, on “Shortening the post processing chain though use of high pressure heat treatment”, More information quintus technologies program
12:00 12:30 Moritz Wollbrink, Manager Business Unit Tool and Die Making, Fraunhofer Institute for Production Technology IPT, Germany, on “Advanced Manufacturing with 3D printing – Process chains of tomorrow”, More information
12:30 13:30 Lunch
13:00 13:30 Welcome and Registration
13:30 14:00 Stijn Lambrechts, Advisor Advanced Manufacturing, Sirris, Belgium, on “Sirris’ vision on AM Integrated Factory”, More information sirris logo program
14:00 14:30 Andre Wegner Andre Wegner, Founder & CEO, Authentise, USA, on “Using Data to Drive Additive Efficiency, Quality and Transparency”, More information authentise program
14:30 15:00 Jeroen Smeltink, Senior System Engineer, AMSYSTEMS – TNO, The Netherlands, on “Continuous AM for production”, More information
15:00 15:30 Break
15:30 16:00 Omar Fergani Omar Fergani, Material Processing Expert and Product Manager Additive Manufacturing , Siemens Industry Software, on “Industrializing Additive Manufacturing”, More information
siemens program
16:00 16:30 stefan rink program Stefan Rink, CEO, AM-Flow, on”Scaling up 3D printing production with automated post-processing”, More information
16:30 17:30 Drinks

Previous editions 3D Printing Materials Conference

Overview of 3D Printing Materials Conference editions
2019 | 2018 |2017 | 2016 | 2015 | 2014

The conference is now integrated in the 3D Printing Event, as one essential part of the 3D Printing / Additive Manufacturing Value Chain.

2019

On April 16 and 17, 2019, Brightlands Chemelot Campus in Sittard-Geleen, The Netherlands, hosted a two-day 3D Printing Event covering the entire Additive Manufacturing value chain, from 3D Printing design to factory integration and post-processing.

The event included five dedicated conferences, where over 30 speakers from reputed companies and research institutions shared their views, and a two day-expo. Read more


2018

On April 17-18, 2018, Brightlands Chemelot Campus in Sittard-Geleen (NL), hosted a two-day event about 3D printing materials, 3D printing design and 4D printing. The event comprised three conferences and an exhibition.
On April 17, the 3D Printing Materials Conference and the 3D Printing Design & Engineering Conference took place in parallel. The first was about polymers and plastics, the latter about the process behind the printing itself (virtual engineering, tools, blockchain, etc).


2017

The 4th edition of the 3D Printing Materials Conference, focused on Polymers, took place on February 02, 2017, at Brightlands Chemelot Campus in Sittard-Geleen, The Netherlands. At the same location, on February 01, the 4D Printing & Meta Materials Conference was held.

The conferences brought together over 150 attendees, who gathered to discuss the most disruptive applications of 3D printing and latest developments and applications in the field. They were not purely academic conferences, but innovative events bringing together brilliant minds and discoveries.


2016

On January 26-27, 2016, the 3rd edition of the 3D Printing Materials Conference took place at MECC Maastricht, in The Netherlands. The conference was successful, attracting many international delegates and provided great intellectual and social interaction for the participants. International leading speakers from renowned companies and institutions such as Harvard University, University of Wollongong, Technical University of Eindhoven, Corbion Purac Biomaterials, Innovation Centre of Polymers, SIRRIS, ACAM GmbH (Aachen Center for Additive Manufacturing), SupraPolix, 3D PPM, VU University Medical Center Amsterdam, Applied Polymer Innovations/Innofil3D, Z3DLab, FOM Institute AMOLF, LUXeXceL Group, 3DCeram and Vormvrij shared their knowledge during the two-day conference.


2015

The program of the second edition of the 3D Printing Materials Conference.


2014

In 2014 the first edition took place
This was the overview of 3D Printing Materials Conference editions

Industrializing AM and merging the worlds of additive manufacturing and machining – Presented by Stijn Brilman, cards plm solutions

Stijn Brilman, cards plm solutions, will speak at 3D Printing Design & Engineering Conference on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands.

Getting rid of the bin of broken dreams! How do we deliver high quality and accurate metal products? Unfortunately, people often forget that AM is more than the printer and controlling the printing process. In order to realize the full potential of additive manufacturing, companies must employ a robust process that integrates design, engineering, manufacturing planning and production operations.

In this presentation we provide the insights of an end-to-end workflow where AM and machining are combined.

Continue reading “Industrializing AM and merging the worlds of additive manufacturing and machining – Presented by Stijn Brilman, cards plm solutions”

Automated Surface Finishing for 3D-printed metal parts as enabler for serial production – Presented by Wolfgang Hansal, Hirtenberger Engineered Surfaces

Wolfgang Hansal, Hirtenberger Engineered Surfaces will speak at 3D Printing Post-Processing Conference on April 17, 2019, during 3D Printing Event in The Netherlands.

With the evolution of 3D-printing of metals from the prototyping scale towards a serial production the different steps in the production chain must be fully understood and adjusted to the each other in order to guarantee a constant and reproducible quality of the final products. Among the different process steps, the post-processing of AM metal parts is crucial but nevertheless still an open issue at industrial scale.

Continue reading “Automated Surface Finishing for 3D-printed metal parts as enabler for serial production – Presented by Wolfgang Hansal, Hirtenberger Engineered Surfaces”

Embedding Unique Functionalities in composites by continuous fiber printing – Presented by Andrea Gasperini, Brightlands Materials Center

Andrea Gasperini, Brightlands Materials Center, will hold his talk at 3D Printing Materials Conference on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands.

The presentation will provide initially an overview over the range of possible sensors (pressure, elongation, flexural) that have been embedded in composites by exploiting the freedom in fiber positioning by FDM. The response of continuous carbon fibers as a function of flexural load will be presented in a more comprehensive fashion.

Continue reading “Embedding Unique Functionalities in composites by continuous fiber printing – Presented by Andrea Gasperini, Brightlands Materials Center”