World’s first 3D printed concrete cycle bridge opened in The Netherlands
Today world’s first 3D printed reinforced, pre-stressed concrete bridge was opened. The cycle bridge is part of a new road around the village of Gemert, in the Netherlands. It was printed at Eindhoven University of Technology. With the knowledge the researchers gained in this project, they are now able to design even larger printed concrete structures.
The bridge is the first civil infrastructure project to be realized with 3D-concrete printing. The bridge is 8 meters long (clear span 6.5 meters) and 3.5 meters wide. As it is a ‘worlds first’, the developers did not take any chances and tested the bridge by putting a load of 5 tons on it, which is a lot more than the load the bridge will actually carry.
The bridge has to meet all regular requirements of course. It is designed to do its duty – to carry cyclists – for thirty years or more. With more cycles than people in the Netherlands, it is expected that hundreds of cyclists will ride over the printed bridge every day. It is part of a large road construction project, led by the company BAM Infra, and commissioned by the province of North-Brabant. Continue reading “World’s first 3D printed concrete cycle bridge opened in The Netherlands”