Towards a guideline for quality assured 3D Printed spare parts – Presented by Onno Ponfoort, Berenschot

Onno Ponfoort, Berenschot, will speak at AM Integrated Factory Conference, on April 17, 2019, during 3D Printing Event in The Netherlands.

Many industrial sectors require quality assurance and certification for parts to be used. Additive manufacturing holds the promise to allow customization of the design of parts, to meet case specific demands. But certification of each individual part is a time consuming and costly operation. This is an entrance hurdle for many ‘standards controlled’ industries.

Continue reading “Towards a guideline for quality assured 3D Printed spare parts – Presented by Onno Ponfoort, Berenschot”

Accelerating Additive Manufacturing with process automation and integration – Presented by Harry Kleijnen, Additive Industries

Harry Kleijnen, Additive Industries will speak at AM Integrated Factory Conference, on April 17, 2019, during 3D Printing Event in The Netherlands.

Todays end to end additive manufacturing production processes are characterized by many separated process steps requiring intensive manual labour and complex planning processes.

For series production of parts this way of working will be too costly and is prone to errors jeopardizing overall equipment efficiency. In his presentation Harry Kleijnen will elaborate on Additive Industries vision and solutions for integrated and automated additive manufacturing.

Continue reading “Accelerating Additive Manufacturing with process automation and integration – Presented by Harry Kleijnen, Additive Industries”

Opportunities and Chances of Additive Manufacturing for Components and Tools – Presented by Eric Klemp, voestalpine Additive manufacturing Center

Opportunities and Chances of Additive Manufacturing for Components and Tools – Presented by Eric Klemp, voestalpine Additive manufacturing Center, at AM Integrated Factory Conference, on April 17, 2019, during 3D Printing Event in The Netherlands.

Additive Manufacturing offers lot of opportunities, especially for tools and components. There are positive aspects and there are risks as well. AM is only successful, if all elements of the value chain are identified and taken into consideration. Only with recognising the potential, the USPs can be achieved. In this presentation, an approach will be shown by different examples.

Interview

What drives you?

Imagination and the wish to generate fresh ideas

Why should the delegate attend your presentation?

Industrial talk based on examples

What emerging technologies/trends do you see as having the greatest potential in the short and long run?

LBM with the combiantion of fresh thinking

What kind of impact do you expect them to have?

Will change a part of the product development and production chain

What are the barriers that might stand in the way?

Know-How, education, production speed, costs, reliability

“Special Quote”

Do we think far enough?

About Eric Klemp

Dr.-Ing. Eric Klemp, born 1966 in Flensburg, study of mechanical engineering and PhD at TU Clausthal, followed by project leader at Bosch und Siemens Hausgeräte GmbH, followed by productarchitect at Rational AG, followed by commercial director at the Direct Manufacturing Research Center and since 2016 CTO at voestalpine Additive Manufacturing Center GmbH in Düsseldorf.

About voestalpine Additive manufacturing Center GmbH

voestalpine is a global technology leader. The vAMC offers a the full suite of production techniques and services throughout the value chain, supporting and driving innovation and development based on lengthy experience around materials and processing. Starting from the metal powder production and enhancement, to design and manufacturing and including post-processing. We offer the end-to-end solution to be your trusted and reliable business partner.

About 3D Printing Event

On April 16 and April 17, 2019, Brightlands Chemelot Campus in Sittard-Geleen, The Netherlands, will host a two-day 3D Printing Event focused on the entire 3D Printing manufacturing value chain from design to end product.The event will include five dedicated conferences and an exhibition.

  • April 16 – 3D Printing Materials Conference – topics: polymers (new materials), metals and multi materials used in 3D Printing
  • April 16 – 3D Design & Engineering Conference
    – topics: 3D design & 3D engineering tools / Visualisation tools,
    Reverse engineering, Value Engineering / Virtual Engineering, Topology
    Optimization, Blockchain & more
  • April 17 – 3D Printing Post-Processing Conference – topics: All actions that are performed after parts are removed from a 3D printer – issues, solutions & future trends.
  • April 17 – AM Integrated Factory Conference
    – topics: Hybrid manufacturing, Implementation of AM systems as part of
    an end-to-end production workflow, Implementation of AM systems in the
    ‘traditional’ production processes
  • April 17 – 4D Printing & Meta Materials Conference
    – topics: 4D Printing from idea to full functionality, Smart materials,
    Applications & opportunities for designing and engineering
  • April 16-17 – Exhibition – Companies active in 3D Printing related fields will be present to showcase the latest developments.

For more information about the event and registration, we invite you to visit https://www.3dprintingevent.com/

This event is organised by Jakajima. For a complete list of upcoming conferences and events, we invite you to visit https://www.jakajima.eu/events/list/


Digitalisation offers the keys of Additive manufacturing inside of the Industry 4.0 eco-system – Presented by Manuel Michiels, Materialise

Digitalisation offers the keys of Additive manufacturing inside of the Industry 4.0 eco-system – Presented by Manuel Michiels, Materialise, at AM Integrated Factory Conference, on April 17, 2019, during 3D Printing Event in The Netherlands.

Driven by an increased demand for process control, traceability, combined with high labor costs: the digitalization of the manufacturing industry is happening on a rapid pace. A little disconnected from the ‘make’ industry, additive manufacturing has mainly been maturing in prototyping bureaus and research labs over the last 3 decades.

Today, more and more applications are found to bring this technology forward as a serial production method. Together with an annual growth rate of 25% (Wohlers) and an anticipated overall business impact of 100 Billion by 2025 (McKinsey), gives an indication that the technology is ready to be connected into the industry 4.0 eco system.

Firstly, this presentation will provide some insights on the various connections and integrations that need to happen to bring additive manufacturing forward into the digital eco-system of serial production. The increased level of interconnectivity is further accelerated by the standardization of many of the data flows.

Secondly, some exciting new workflows and opportunities will be presented that can be captured by digitalizing the AM manufacturing flow.

Interview

What drives you?

Analyzing market evolutions and identifying exciting new opportunities that will allow even more meaningful additive manufacturing applications to happen. I have a firm believe that open innovation between many industrial stakeholders is the best way forward to boost this industry.

Why should the delegate attend your presentation?

Get an overview of the standardisations and integrations that are needed to run a 3D printing production line.

What emerging technologies/trends do you see as having the greatest potential in the short and long run?

Short term: hybrid data formats, 3MF and MTConnect standard
Long term: Digital rights management and machine learning

What kind of impact do you expect them to have?

Short term: They will allow for end to end digital engineering and manufacturing flows with additive manufacturing.
Long term: They will allow further scaling of AM production into a distributed manufacturing network and further process control and optimisation.

What are the barriers that might stand in the way?

The industry will always balance between proprietary information and systems that will openly share information.

“Special Quote”

Additive manufacturing is born as a digital technology, make sure to get most out of it.

About Manuel Michiels

Following technological trends and market evolutions, it is my task to initiate and develop the strategic innovations that will bring additive manufacturing forward.

Manuel Michiels is a forward thinking technologist that looks into the future of Additive Manufacturing. As an innovation manager on the software department of Materialise, he works on adding novel technologies and applications to the Materialise Software portfolio based on business and market intelligence.

His business and technological insights grew out of a solid experience as application engineer offering training and consultancy for a range of industries using the 3D Printing technology. Manuel co-develop projects in which external companies, like Siemens PLM for example, rely on the 27+ years of Materialise’ leading technology to strength their entry into the domain of Additive Manufacturing.

More recently, Manuel successfully initiated and managed the adoption of finite element analysis into the Materialise Software platform.

About Materialise

Our open and flexible platforms enable players in industries such as healthcare, automotive, aerospace, art and design, and consumer goods, to build innovative 3D printing applications that make the world a better and healthier place. Headquartered in Belgium, with branches worldwide, Materialise has combined the largest group of software developers in the industry with one of the largest 3D printing facilities in the world. Ultimately, we empower our customers to transition towards a digital manufacturing process and to launch innovations that have the potential to forever change the faces of their industries. And that’s what keeps us pioneering. That’s why we continue to encourage, inspire, and co-create for a better and healthier world.

About 3D Printing Event

On April 16 and April 17, 2019, Brightlands Chemelot Campus in Sittard-Geleen, The Netherlands, will host a two-day 3D Printing Event focused on the entire 3D Printing manufacturing value chain from design to end product.The event will include five dedicated conferences and an exhibition.

  • April 16 – 3D Printing Materials Conference – topics: polymers (new materials), metals and multi materials used in 3D Printing
  • April 16 – 3D Design & Engineering Conference
    – topics: 3D design & 3D engineering tools / Visualisation tools,
    Reverse engineering, Value Engineering / Virtual Engineering, Topology
    Optimization, Blockchain & more
  • April 17 – 3D Printing Post-Processing Conference – topics: All actions that are performed after parts are removed from a 3D printer – issues, solutions & future trends.
  • April 17 – AM Integrated Factory Conference
    – topics: Hybrid manufacturing, Implementation of AM systems as part of
    an end-to-end production workflow, Implementation of AM systems in the
    ‘traditional’ production processes
  • April 17 – 4D Printing & Meta Materials Conference
    – topics: 4D Printing from idea to full functionality, Smart materials,
    Applications & opportunities for designing and engineering
  • April 16-17 – Exhibition – Companies active in 3D Printing related fields will be present to showcase the latest developments.

For more information about the event and registration, we invite you to visit https://www.3dprintingevent.com/

This event is organised by Jakajima. For a complete list of upcoming conferences and events, we invite you to visit https://www.jakajima.eu/events/list/

Interregional collaboration on 3D Printing – Presented by Coen de Graaf, Brabant Province

Interregional collaboration on 3D Printing – Presented by Coen de Graaf, Brabant Province, at AM Integrated Factory Conference, on April 17, 2019, during 3D Printing Event in The Netherlands.

In this presentation we will inform you about our approach on interregional collaboration on 3D Printing. Europe’s innovative regions in manufacturing of high complex, low volume products and parts mainly for the high-tech industry we are facing the challenges and opportunities of digitization of the industry and new (production) technologies. In order to keep our position as innovative region we carry out an active strategy to speed up the uptake of new technologies and improve our competitiveness.

Additive manufacturing is a relatively new technology in addition to- or replacing “traditional” manufacturing processes. Before the industry, and in particular the SME’s are ready to implement any kind of this new technology, a lot of concerns and reluctance have to be overcome. Questions in relation to materials, design, pre- and post processing, automation, transfers, quality control and certification are to be addressed.

The Vanguard Initiative supports the collaboration between Research centers, fieldlabs, technical centers and companies on these topics. Fieldlabs are responsible for developing, industrialising and integrating Additive manufacturing technologies in the manufacturing industry and by nature are an important part of this eco-system. One objective of these Fieldlabs is to lower the thresholds for SME’s for uptaking new technologies like AM.

Interview

What drives you?

Europe faces an enormous challenge to increase its competitiveness. We need to modernize our industries rapidly. Regional collaboration in Europe is the best opportunity to speed up this modernization. Let’s contribute together!

Why should the delegate attend your presentation?

This presentation will give you an insight of the current activities and opportunities in the Vanguard Initiative for companies, institutes and regional clusters.

What emerging technologies/trends do you see as having the greatest potential in the short and long run?

Clean, fast and flexible production saving energy and resources is vital to meet the societal challenges and at the same time increase our competitiveness. 3D printing is one of the solutions.

What kind of impact do you expect them to have?

We need to use new technologies like 3D Printing for reducing emissions and waste.

What are the barriers that might stand in the way?

There is still al lot of potential for SME’s in uptaking the 3D printing technologies. The Vanguard Initiative can help addressing the challenges SME’s face.

“Special Quote”

Interregional collaboration is necessary to improve the uptake of new technologies and support SME’s.

About Coen de Graaf

Mr. Coen de Graaf is projectleader at the Province of Brabant (regional public authority) on Hightech Innovation and co-leading the Factory of the Future-program of the region. He is also strongly involved in interregional partnerships like Vanguard and Manunet.

Within the Vanguard initiative he is co-leading projects on Additive manufacturing and Efficient & Sustainable manufacturing. He has great expertise in strategy development, project management and implementation of change -management.

Besides his role at the Province of Brabant, he is the national coordinator for the Human Capital Agenda of the High Tech sector in the Netherlands.

About Brabant Province

Noord-Brabant (English: North Brabant) is a province of the Netherlands, located in the south of the country. The Province of Noord-Brabant represents the administrative layer between the national government and the local municipalities. The provincial administration takes initiatives on an economic, social and cultural level and coordinates actions.

The provincial administration of Brabant is primarily concerned with:

Spatial development
Accessibility and mobility for the region
Regional economic policy
Culture and regional identity

About 3D Printing Event

On April 16 and April 17, 2019, Brightlands Chemelot Campus in Sittard-Geleen, The Netherlands, will host a two-day 3D Printing Event focused on the entire 3D Printing manufacturing value chain from design to end product.The event will include five dedicated conferences and an exhibition.

  • April 16 – 3D Printing Materials Conference – topics: polymers (new materials), metals and multi materials used in 3D Printing
  • April 16 – 3D Design & Engineering Conference
    – topics: 3D design & 3D engineering tools / Visualisation tools,
    Reverse engineering, Value Engineering / Virtual Engineering, Topology
    Optimization, Blockchain & more
  • April 17 – 3D Printing Post-Processing Conference – topics: All actions that are performed after parts are removed from a 3D printer – issues, solutions & future trends.
  • April 17 – AM Integrated Factory Conference
    – topics: Hybrid manufacturing, Implementation of AM systems as part of
    an end-to-end production workflow, Implementation of AM systems in the
    ‘traditional’ production processes
  • April 17 – 4D Printing & Meta Materials Conference
    – topics: 4D Printing from idea to full functionality, Smart materials,
    Applications & opportunities for designing and engineering
  • April 16-17 – Exhibition – Companies active in 3D Printing related fields will be present to showcase the latest developments.

For more information about the event and registration, we invite you to visit https://www.3dprintingevent.com/

This event is organised by Jakajima. For a complete list of upcoming conferences and events, we invite you to visit https://www.jakajima.eu/events/list/

Only 3 weeks to register with Early Bird discount for 3D Printing Event

3D Printing Event

There are only 3 weeks left to register with Early Bird discount for the 3D Printing Event, April 16-17, 2019, Brightlands Chemelot Campus, Sittard-Geleen, The Netherlands.

The 3D Printing Event is focused on the entire 3D Printing manufacturing value chain from design to end product. It includes five dedicated conferences and an exhibition. REGISTER HERE

Day 1, April 16

3D Printing Materials Conference – topics: polymers (new materials), metals and multi materials used in 3D Printing

3D Design & Engineering Conference – topics: 3D design & 3D engineering tools / Visualisation tools, Reverse engineering, Value Engineering / Virtual Engineering, Topology Optimization, Blockchain & more

Day 2, April 17

3D Printing Post-Processing Conference – topics: All actions that are performed after parts are removed from a 3D printer – issues, solutions & future trends.

AM Integrated Factory Conference – topics: Hybrid manufacturing, Implementation of AM systems as part of an end-to-end production workflow, Implementation of AM systems in the ‘traditional’ production processes

4D Printing & Meta Materials Conference – topics: 4D Printing from idea to full functionality, Smart materials, Applications & opportunities for designing and engineering.

Confirmed speakers so far:

16 April
3D Printing Materials Conference / 3D Design & Engineering Conference
    mats sjöstedt program Mats Sjöstedt, VP Business development and Sales, Quintus Technologies AB, Sweden quintus program  
    Geraldine Schnelting program Geraldine Schnelting, Junior researcher, Green PAC, on “Stereolithography 3D Printing with biobased resins”,More information nhl stenden program  
    maxime legrand program Simon Kasböck, Business Development Manager Additive Manufacturing, ViscoTec Pumpen- u. Dosiertechnik GmbH, Germany, on “3D Printing with new materials like silicones, epoxy resins and polyurethanes”, More information visotec program  
    maxime legrand program Maxime Legrand, Sirris, on ‘to print parts with different Shore A on a SLS 3D Printer’ sirris program  
    Miguel Fernandez-Vicente program Miguel Fernandez-Vicente, Advanced Research Engineer Design for AM, MTC – Manufacturing Technology Centre, UK, on ‘Changing the design mindset with 3D Printing. Examples from the UK National Centre for AM’ mtc program  
    Orlando Sardaro program Orlando Sardaro, General Manager, Design8 design8 logo program  
17 April
3D Printing Post Processing Conference/ AM Integrated Factory Conference
    Maximilian Kraus program Maximilian Kraus, Sales & Business Development Manager, EMEA, DyeMansion GmbH dye mansion program
    arjan de bruin program Arjan de Bruin, Innovation Consultant, Vereniging ION vereniging ion program
    eric klemp program Eric Klemp, COO, voestalpine Additive Manufacturing Center GmbH voestalpine program
    onno pontfoort program Onno Ponfoort, Practice Leader 3D Printing, Berenschot on ‘Towards a guideline for production-ready parts and accompanying economic model to print qualified, functional metal production (spare) parts, to be used in the Oil, Gas and Maritime industries.’ berenschot program
    coen de graaf program Coen de Graaf, Projectleader Vanguard Initiative, Province of Brabant, on ‘Additive-Subtractive platform, how to integrate additive & subtractive technology production flows’ vanguard initiative program
17 April
4D Printing & Meta Materials Conference
    Andreas Heinrich Prof. Dr. Andreas Heinrich, Aalen University, Center for Optical Technologies, Germany, on “Additive manufacturing of passive and active optical components”, More information aalen university program  
    Monssef DRISSI-HABTI program Monssef DRISSI-HABTI, Research Professor, IFSTTAR / Director, The Consortium Durability of Smart Composite Structures (GIS DURSI), France iffstar logo program  
    hiroya tanaka program Hiroya Tanaka, Professor, Keio University Social Fabrication Lab , on “4D Printing for Smart Cities”, More information keio university program  
    miguel bessa program Miguel Bessa, Assistant Professor, Delft University of Technology on ‘Machine-learning to design mechanical metamaterials’ delft university of technology  
    Vimukthi Gunatilleke program Duo presentation
Vimukthi Gunatilleke, Industrial Design Student, Eindhoven University of Technology on ‘Rapid Liquid 4D Printing based on off the shelf delta 3D printer’
Eindhoven university of technology  
    Jori van der Kolk program Duo presentation
Jori van der Kolk, Industrial Design Student, Eindhoven University of Technology on ‘Rapid Liquid 4D Printing based on off the shelf delta 3D printer’
Eindhoven university of technology  

3D Printing Event welcomes CECIMO as Content Partner

cecimo

3D Printing Event welcomes CECIMO as Content Partner

About Cecimo
Cecimo is the European Association representing the common interests of the Machine Tool Industries globally and at EU level. We bring together 15 National Associations of machine tool builders, which represent approximately 1300 industrial enterprises in Europe (EU + EFTA + Turkey), over 80% of which are SMEs.

CECIMO covers 98% of total Machine Tool production in Europe and about 36% worldwide. It accounts for almost 150,000 employees and a turnover of more than €24 billion in 2016. Approximately 75% of CECIMO production is shipped abroad, whereas around half of it is exported outside Europe.

CECIMO assumes a key role in determining the strategic direction of the European machine tool industry and promotes the development of the sector in the fields of economy, technology and science.

About 3D Printing Event

On April 16-17, 2019, Brightlands Chemelot Campus in Sittart-Geleen will host a two-day event that covers the whole 3d printing / AM value chain from design to end product with four dedicated conferences:

April 16:

3D Printing Materials ConferenceFocus topics: Polymers (New materials) | Application of polymers in 3D Printing (from standard to high quality / high risk) | Multi material 3D Printing

3D Printing Design & Engineering Conference – Focus topics: 3D design & 3D engineering tools / Visualisation tools | Value Engineering / Virtual Engineering | Topology Optimization | Validation | IP, liability, legal and technical issues | Reverse engineering | Postprocessing / AMES (Additive Manufacturing Execution Systems) / (MES (Manufacturing Execution Systems) | Blockchain

April 17:

3D Printing Post-Processing Conference – Focus topics: Various aspects related to the often overlooked third step in 3D printing: post-processing. The talks will cover issues, solutions and future trends.

AM Integrated Factory Conference – Focus topics: Use of Hybrid manufacturing (systems where additive and subtractive manufacturing are combined in the same machine) | Implemention of AM systems as part of an end-to-end production workflow ( including: material handling systems, multiple additive manufacturing systems, part handling systems, part cleaning systems) | Implementation of AM systems in the ‘traditional’ production processes

And forward looking into the future: 4D Printing & Meta Materials Conference, April 17

This event is organised by Jakajima. For a complete list of upcoming conferences and events, we invite you to visit https://www.jakajima.eu/events/list/

Sirris’ vision on AM Integrated Factory – Presented by Stijn Lambrechts, Sirris

Sirris’ vision on AM Integrated Factory – Presented by Stijn Lambrechts, Sirris, at AM Factory Conference on December 4, 2018, at Brightlands Chemelot Campus, Sittard-Geleen, The Netherlands.

Sirris launched its AM Integrated Factory on November, 14th 2017. The presentation shows Sirris’ view on how 3Dprinting needs to be integrated on the shop floor. Continue reading “Sirris’ vision on AM Integrated Factory – Presented by Stijn Lambrechts, Sirris”

Industrializing Additive Manufacturing – Presented by Omar Fergani, Siemens Industry Software

Industrializing Additive Manufacturing – Presented by Omar Fergani, Siemens Industry Software B.V, at the AM Integrated Factory Conference, December 4, 2018, at Brightlands Chemelot Campus, Sittard-Geleen, The Netherlands.

The presentation will demonstrate how Siemens industrializes additive manufacturing; how we design and produce useful parts at scale.
The session will highlight the methodologies and the software tools that we use to turn next generation design ideas (in this case from Bugatti and Siemens Power and Gas) into commercial products. Continue reading “Industrializing Additive Manufacturing – Presented by Omar Fergani, Siemens Industry Software”

Continuous AM for production – Presented by Jeroen Smeltink, AMSYSTEMS – TNO

Continuous AM for production – Presented by Jeroen Smeltink, AMSYSTEMS – TNO, at the AM Integrated Factory Conference, December 4, 2018, at Brightlands Chemelot Campus, Sittard-Geleen, The Netherlands.

Since its inception Additive Manufacturing (AM) has been the promise for a paradigm shift in production technology and processes. Moving from prototyping towards mass customization and printing on demand, the AM-process now needs to make a further leap. By continuous AM the productivity can be increased and as a result the cost for the production can be decreased.

Continue reading “Continuous AM for production – Presented by Jeroen Smeltink, AMSYSTEMS – TNO”