Lucas Janssen, CEAD, will speak at 3D Printing Materials Conference on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands.
CEAD is a technology supplier on the frontier of composite additive manufacturing. The Continuous Fibre Additive Manufacturing, or CFAM in short, is unique and enables the rapid production of large composite parts such as moulds, facade cladding elements and exterior panels for trains and boats.
What drives you?
Continue reading “Large scale continuous fibre additive manufacturing for buildings and transportation sectors – Presented by Lucas Janssen, CEAD”
Chemelot Innovation and Learning Labs (CHILL) will exhibit at 3D Printing Event 2019
About Chemelot Innovation and Learning Labs (CHILL)
Chemelot Innovation and Learning Labs (CHILL) connects entrepreneurs, established SMEs, large companies and research institutes, creating limitless opportunities for innovation.
You face the constant challenge of innovating products and processes in order to maintain your competitive edge. In a knowledge- and capital intensive sector such as chemistry, this is a daunting task.
There is no shortage of ideas, but the possibilities for implementation and for finding solutions are often limited.
CHILL can help. Thanks to our network of specialists, specific knowledge is available. Moreover, CHILL has well-equipped research facilities and plenty of people.
This means we are able to find solutions to your challenges and give your search for innovation a fresh boost.
Continue reading “3D Printing Event welcomes Chemelot Innovation and Learning Labs (CHILL) as Bronze Partner”
Stijn Brilman, cards plm solutions, will speak at 3D Printing Design & Engineering Conference on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands.
Getting rid of the bin of broken dreams! How do we deliver high quality and accurate metal products? Unfortunately, people often forget that AM is more than the printer and controlling the printing process. In order to realize the full potential of additive manufacturing, companies must employ a robust process that integrates design, engineering, manufacturing planning and production operations.
In this presentation we provide the insights of an end-to-end workflow where AM and machining are combined.
Continue reading “Industrializing AM and merging the worlds of additive manufacturing and machining – Presented by Stijn Brilman, cards plm solutions”
Nirali Surati, DSM, will speak at 3D Printing Materials Conference on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands.
This is a two-part presentation in partnership with AMT.
The ‘eco system’ approach from materials – printer – to post processing (part one) presented by DSM
The ‘eco system’ approach from materials – printer – to post processing (part two) presented by AMT
The Additive Manufacturing landscape today consists of several moving parts such as materials, machines, software, post processing technologies etc. that all need to work in harmony to ensure a positive experience for users. Varied stakeholders in the industry cater to each of these moving parts forming the ecosystem of additive manufacturing. These seemingly disconnected steps have a broad influence on the additive manufacturing experience and hence its wider adoption. The presentations talk about how DSM and AMT are working on these challenges with a combined eco-system approach.
Continue reading “The ‘eco system’ approach from materials – printer – to post processing (part one) – Nirali Surati, DSM”
Abdellatif Bey-Temsamani, Flanders Make, will speak at 3D Printing Design & Engineering Conference on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands.
With the industrial transition to use Additive Manufacturing (AM) for Series Production, AM machine builders, SW/HW providers and end-users are confronted with different challenges to increase productivity, decrease lead time and produce parts with high quality. The current practice is however far from reaching the desired productivity and quality that are translated to large scrap rate in current production. This presentation will highlight examples for opportunities, based on industrial projects conducted by Flanders Make, to improve the AM process and machines leading to reduce lead time, increase productivity and reduce the scrap rate.
Continue reading “How to boost Additive Manufacturing (AM) for serial production? Opportunities to improve AM processes and Machines – Presented by Abdellatif Bey-Temsamani, Flanders Make”
On April 16, the first day of the 3D Printing Event in The Netherlands, over 13 speakers will talk during two dedicated conferences, in parallel sessions: 3D Printing Materials Conference and 3D Printing Design & Engineering Conference.
Continue reading “Who will speak on the first day of 3D Printing Event 2019 & what will the focus of the presentations be?”
Arjan de Bruin, Vereniging ION, will speak at 3D Printing Post-Processing Conference on April 17, 2019, during 3D Printing Event in The Netherlands.
The attention of the industry involved in additive manufacturing for surface treatment seems very small. People are mainly still busy with construction rules, powder compositions and laser technology. The “surface technology” process block is left blank in many presentations. Incorrectly in the opinion of Vereniging ION. After all, if a product is made according to the additive manufacturing method, a state-of-the-art surface treatment is necessary for proper preservation, improvement of material properties or from an aesthetic point of view.
Continue reading “Results of some practical experiments by the surface treatment industry – Presented by Arjan de Bruin, Vereniging ION”
Onno Ponfoort, Berenschot, will speak at AM Integrated Factory Conference, on April 17, 2019, during 3D Printing Event in The Netherlands.
Many industrial sectors require quality assurance and certification for parts to be used. Additive manufacturing holds the promise to allow customization of the design of parts, to meet case specific demands. But certification of each individual part is a time consuming and costly operation. This is an entrance hurdle for many ‘standards controlled’ industries.
Continue reading “Towards a guideline for quality assured 3D Printed spare parts – Presented by Onno Ponfoort, Berenschot”
Wolfgang Hansal, Hirtenberger Engineered Surfaces will speak at 3D Printing Post-Processing Conference on April 17, 2019, during 3D Printing Event in The Netherlands.
With the evolution of 3D-printing of metals from the prototyping scale towards a serial production the different steps in the production chain must be fully understood and adjusted to the each other in order to guarantee a constant and reproducible quality of the final products. Among the different process steps, the post-processing of AM metal parts is crucial but nevertheless still an open issue at industrial scale.
Continue reading “Automated Surface Finishing for 3D-printed metal parts as enabler for serial production – Presented by Wolfgang Hansal, Hirtenberger Engineered Surfaces”