Offered by our silver partner myprintoo. This company from Hamburg, Germany is a specialist in 3D printing technology. We offer not only products from the top manufacturers, but also provide all-round services for 3D printing (consulting, product trainings, webinars, maintenance).
Continue reading “Download brochures of 3NTR or Anisoprint”Interview with Kevin Neugebauer, founder of myprintoo, silver partner 3D Printing Event
myprintoo from Hamburg, Germany is a specialist in 3D printing technology. We offer not only products from the top manufacturers, but also provide all-round services for 3D printing (consulting, product trainings, webinars, maintenance). We are exclusive partner for 3ntr (FDM 3D printers) and Anisoprint (Composite Fiber Coextrusion) and partner for Formlabs (SLA).
Continue reading “Interview with Kevin Neugebauer, founder of myprintoo, silver partner 3D Printing Event”3D Printing Value Chain Event welcomes MarketsandMarkets™ as Knowledge Partner
MarketsandMarkets™ is Knowledge Partner of 3D Printing Value Chain Event
About MarketsandMarkets™
MarketsandMarkets™ is the world’s largest revenue impact company, presently partnering over 7500 organizations which includes 80% of Fortune 2000 organizations.
Continue reading “3D Printing Value Chain Event welcomes MarketsandMarkets™ as Knowledge Partner”3D Printing Event welcomes CECIMO as Content Partner
3D Printing Event welcomes CECIMO as Content Partner
About Cecimo
Cecimo is the European Association representing the common interests of
the Machine Tool Industries globally and at EU level. We bring together
15 National Associations of machine tool builders, which represent
approximately 1300 industrial enterprises in Europe (EU + EFTA +
Turkey), over 80% of which are SMEs.
CECIMO covers 98% of total Machine Tool production in Europe and about 36% worldwide. It accounts for almost 150,000 employees and a turnover of more than €24 billion in 2016. Approximately 75% of CECIMO production is shipped abroad, whereas around half of it is exported outside Europe.
CECIMO assumes a key role in determining the strategic direction of the European machine tool industry and promotes the development of the sector in the fields of economy, technology and science.
About 3D Printing Event
On April 16-17, 2019, Brightlands Chemelot Campus in Sittart-Geleen will host a two-day event that covers the whole 3d printing / AM value chain from design to end product with four dedicated conferences:
April 16:
3D Printing Materials Conference – Focus topics: Polymers (New materials) | Application of polymers in 3D Printing (from standard to high quality / high risk) | Multi material 3D Printing
3D Printing Design & Engineering Conference – Focus topics: 3D design & 3D engineering tools / Visualisation tools | Value Engineering / Virtual Engineering | Topology Optimization | Validation | IP, liability, legal and technical issues | Reverse engineering | Postprocessing / AMES (Additive Manufacturing Execution Systems) / (MES (Manufacturing Execution Systems) | Blockchain
April 17:
3D Printing Post-Processing Conference – Focus topics: Various aspects related to the often overlooked third step in 3D printing: post-processing. The talks will cover issues, solutions and future trends.
AM Integrated Factory Conference – Focus topics: Use of Hybrid manufacturing (systems where additive and subtractive manufacturing are combined in the same machine) | Implemention of AM systems as part of an end-to-end production workflow ( including: material handling systems, multiple additive manufacturing systems, part handling systems, part cleaning systems) | Implementation of AM systems in the ‘traditional’ production processes
And forward looking into the future: 4D Printing & Meta Materials Conference, April 17
This event is organised by Jakajima. For a complete list of upcoming conferences and events, we invite you to visit https://www.jakajima.eu/events/list/
CECIMO is Content Partner of AM Integrated Factory Conference
CECIMO is Content Partner of AM Integrated Factory Conference
About CECIMO
CECIMO is the European association for the Additive Manufacturing (AM) industry. We represent 15 national associations for AM technology all over Europe. Through all of its member countries across the continent, CECIMO represents 350 leading AM companies across the B2B and B2C spaces. These companies are active in a variety of critical segments in the AM value chain: from the supply of all different types of raw materials for additive manufacturing and the development of software, to machine manufacturing and post-processing. Continue reading “CECIMO is Content Partner of AM Integrated Factory Conference”
CECIMO is Content Partner of 3D Printing Post-Processing Conference
CECIMO is Content Partner of 3D Printing Post-Processing Conference
About CECIMO
CECIMO is the European association for the Additive Manufacturing (AM) industry. We represent 15 national associations for AM technology all over Europe. Through all of its member countries across the continent, CECIMO represents 350 leading AM companies across the B2B and B2C spaces. These companies are active in a variety of critical segments in the AM value chain: from the supply of all different types of raw materials for additive manufacturing and the development of software, to machine manufacturing and post-processing. Continue reading “CECIMO is Content Partner of 3D Printing Post-Processing Conference”
AM Integrated Factory Conference welcomes Flam3D as Content Partner
AM Integrated Factory Conference welcomes Flam3D as Content Partner
About Flam3D
Flam3D is the independent not-for-profit platform for all stakeholders active in the domain of 3D-printing. We unite, represent and support companies, research institutions, governments and stakeholders. Over 80 companies and research institutes are member of our association.
Flam3D is looking to strengthen value chains, both inside and outside the organization. We are open for companies and organizations interested in 3D-printing and Additive Manufacturing applications. Within our network, we will always find relevant contacts to help you with your 3D challenge. Continue reading “AM Integrated Factory Conference welcomes Flam3D as Content Partner”
3D Printing Post-Processing Conference welcomes Flam3D as Content Partner
3D Printing Post-Processing Conference welcomes Flam3D as Content Partner
About Flam3D
Flam3D is the independent not-for-profit platform for all stakeholders active in the domain of 3D-printing. We unite, represent and support companies, research institutions, governments and stakeholders. Over 80 companies and research institutes are member of our association.
Flam3D is looking to strengthen value chains, both inside and outside the organization. We are open for companies and organizations interested in 3D-printing and Additive Manufacturing applications. Within our network, we will always find relevant contacts to help you with your 3D challenge. Continue reading “3D Printing Post-Processing Conference welcomes Flam3D as Content Partner”
AM Integrated Factory Conference welcomes Sirris as Content Partner
AM Integrated Factory Conference welcomes Sirris as Content Partner
About Sirris
Sirris, the collective centre of the Belgian technology industry, helps companies to introduce technological innovation enabling them to strengthen their competitive position. Every year, the 120 Sirris experts help about 1800 companies to implement technological innovations by researching new technologies, raising industry awareness of promising innovations, and providing advice at all decision-making levels and support from the initial concept to the operational solution. The organization’s tailor-made services can range from a few hours’ consulting to research projects spanning months or years. Founded in 1949 under the name WTCM-CRIF by Agoria, the Belgian Federation for the Technology Industry, the mission of Sirris has remained unchanged: increase the sector’s competitiveness through technology and innovation. Continue reading “AM Integrated Factory Conference welcomes Sirris as Content Partner”
3D Printing Design & Engineering Conference welcomes new partner: FABulous, the European Acceleration Program
FABulous, the European Acceleration Program, is partner of the 3D Printing & Engineering Conference, which will take place on May 2016 at Designhuis in Eindhoven, The Netherlands.
About FABulous Continue reading “3D Printing Design & Engineering Conference welcomes new partner: FABulous, the European Acceleration Program”