Maxime Legrand, Sirris, will speak at 3D Printing Materials Conference on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands.
New materials are emerging in SLS 3D printing. How to make the best of it? In this presentation, we will consider TPU printing with SLS and how it is possible to change its mechanical properties through parameters optimization and lattice structures.
Continue reading “Printing multi-hardness parts with SLS – Presented by Maxime Legrand, Sirris”
3D Printing Materials Conference welcomes Van Mierlo as Start-Up Partner
About Van Mierlo
Van Mierlo Ingenieursbureau is an independent design company specializing in development of intelligent electronics for measurement and control applications. Continue reading “3D Printing Materials Conference welcomes Van Mierlo as Start-Up Partner”
Additive manufacturing can also be used to repair components of aircraft engine
The exciting news for air transport, and aviation in general, is that the brand new additive technology, which already allows engine parts to be produced by 3D printing, can also be used to repair the components of an aircraft engine. In fact, among the additive technologies recently developed, Cold Spray is finally to be applied in Avio Aero, and for the first time in GE, on the accessory drive train of the GE90. In addition, the Avio Aero repair teams at Brindisi and the Additive Repair Development Centre at the Polytechnic of Bari are proceeding with the development and study of this technology (as well as Laser Deposition) for several other applications. These include portions of components or engine parts for other aircraft, such as the GEnx, CFM56, and some others which power the largest aircraft daily flying between countries and continents. Continue reading “Additive manufacturing can also be used to repair components of aircraft engine (Video)”
Architecture firms Arup, CLS Architetti are 3D printing a concrete house
Architecture firms Arup, UK, and CLS Architetti, Italy, are 3D printing a concrete house as part of their 3D Housing 05 project, for this year’s Milan Design Week.
Designed to be disassembled and moved, the house will be 3D printed over the course of a week, on site at Milan’s Piazza Cesare Beccaria. It will feature a living area, bedroom, kitchen and bathroom over an area of 100 square meters. The architects intend the house to be a demonstration of the maturity of concrete 3D printing for architectural applications. Continue reading “Architecture firms Arup, CLS Architetti are 3D printing a concrete house”
Today’s automotive manufacturers are faced with the ever-increasing demand of improving vehicle efficiency. Manufacturers have tackled the problem from all angles: reducing weight, creating more efficient internal combustion engines, improving powertrains, and reducing noise. But to achieve a more efficient performing vehicle, the automotive market has started using a new process.
Metal Additive Manufacturing (AM) brings a natural competitive advantage for time to-market contraction of new ideas and for the development of innovative solutions. AM is used for prototyping parts with quality fit and function. The process has also been used to mass manufacture parts that require a unique shape, typically impossible to achieve via traditional machining. Continue reading “New steel material for additive manufacturing used by GKN Sinter Metals and Porsche Engineering”
While 3D printing technology has been responsible for many advances and inventions over the years, it’s not foolproof – some methods don’t produce items with the best material properties, and others result in surfaces that are rough and unclean. The Vienna University of Technology, better known as TU Wien, is responsible for many innovations in 3D printing materials. The university also generated a spin-off company, the startup Cubicure, which developed a new 3D printing technique called hot lithography.
TU Wien has spent years developing 3D printing processes, along with material mixtures that are well-suited for a wide variety of applications. Cubicure is a direct result of this research.
Dr. Robert Gmeiner, CEO of Cubicure, said, “3D printing already plays a key role in the production of prototypes or utility models. But even for all industrial products that are produced in small quantities or have to be tailored to the individual needs of the individual customer – such as components in the medical sector – the high-quality 3D printing offers great opportunities.” Continue reading “TU Wien Spin-Off Cubicure introduces new 3D Printing materials”
3-D printing has come a long way since the first rapid prototyping patent was rejected in 1980. The technology has evolved from basic designs to a wide range of highly-customizable objects. Still, there’s a big issue: Once objects are printed, they’re final. If you need a change, you’ll need a reprint.
But imagine if that weren’t the case — if, for example, you could change the color of your smartphone case or earrings on demand.
Researchers from MIT’s Computer Science and Artificial Intelligence Laboratory (CSAIL) have gotten closer to making that a reality. In a new paper, they present ColorMod, a method for repeatedly changing the colors of 3-D printed objects, after fabrication.
Using their own 3-D printable ink that changes color when exposed to ultraviolet light, the team can recolor a multicolored object in just over 20 minutes — and they say they expect that number to decrease significantly with future improvements. Continue reading “Colour-changing 3D Printables, with custom ink & ultraviolet light (Video)”
3D Printing Materials Conference welcomes 3D Print Magazine as Media Partner. The event takes place on 17 April 2018 at Brightlands Chemelot, Geleen, The Netherlands.
About 3D Print Magazine
3D Print magazine is a publication of Made-in-Europe and 54u Media.
In addition to this website, there is also a quarterly magazine, specifically aimed at the manufacturing industry in the Benelux.
About 3D Printing Materials Conference
The 3D Printing Materials Conference [April 17, 2018, Geleen, The Netherlands] The 3D Printing Materials Conference is a platform and information interface enabling an exchange of informations on market requirements, research interests and current results, skills and resources as well as facilitating the building of future partnerships. Academics, engineers, designers, and managers are invited to lecture on their state-of-the-art developments and future prospects or display their products and offers as exhibitor. Continue reading “3D Printing Materials Conference welcomes 3D Print Magazine as Media Partner”
Can 3D Printing be turned into a truly productive technology with MES software?
In the world of advanced manufacturing, the term MES to describe software based Manufacturing Execution Systems is already fairly common. However, it is only now beginning to be introduced to AM, leading us to coin a new “AMES” (Additive Manufacturing Execution Systems) acronym. This is occurring now because only recently did AM start to become a true batch and potentially even a mass manufacturing technology.
Major industrial software developers already provide several MES solution but only a few are able to adapt these solutions to the unique characteristics of the end-to-end 3D printing production cycle, integrating strictly digital elements such as quotation enginers all the way to ERP, CRM and even 3D file protecion features. Continue reading “Can 3D Printing be turned into a truly productive technology with MES software?”
VTT Finland is developing 3D printing materials for wound care
Cellulose nanofibrils have properties that can improve the characteristics of bio-based 3D-printing pastes. VTT Technical Research Centre of Finland is developing a 3D wound care product for monitoring wound condition in hospital care. However, the first commercial nanocellulose applications will be seen in indoor decoration elements, textiles and the production of mock-ups.
3D printing has proven to be an efficient manufacturing method for complex, customised and light structures. In addition to thermoplastics, 3D printing materials include metals, ceramics and foodstuffs. The range of biomaterials in 3D paste printing is still fairly limited, since pastes pose unique challenges: their structure must not collapse during printing and the objects manufactured must remain sufficiently strong, rigid or flexible after drying. In 3D biomaterial filaments, however, commercial products already exist. Continue reading “VTT Finland is developing 3D printing materials for wound care”