The ‘eco system’ approach from materials – printer – to post processing (part one) – Nirali Surati, DSM

Nirali Surati, DSM, will speak at 3D Printing Materials Conference on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands. This is a two-part presentation in partnership with AMT. The ‘eco system’ approach from materials – printer – to post processing (part one) presented by DSMThe ‘eco system’ approach from …

3D Printing Event welcomes DSM Additive Manufacturing as Bronze Partner

3D Printing Event welcomes DSM Additive Manufacturing as Bronze Partner About DSM Additive Manufacturing At DSM, we have one clear goal: unlock the full potential of additive manufacturing, enabling sustainable production and improving people’s living. Drawing on decades of experience in 3D printing technologies, performance materials and deep application expertise, DSM helps manufacturers change the …

New developments of short and continuous fibre printing (VIDEO)

by César Stüpp, Research Scientist, Brightlands Materials Center Additive manufacturing (AM) techniques have been extensively explored in the last decades due to their potential to transform existent production technologies. Fused filament fabrication (FFF) is a very versatile AM technique, although it is widely used for prototyping due to their limited mechanical properties, especially in between …

Strength of 3D Printed Polymer Parts (VIDEO)

Presentation / interview with César Stüpp, Brightlands Materials Center / TNO. Fused filament fabrication (FFF) is a very versatile AM technique, although it is widely used for prototyping due to their limited mechanical properties, especially in between layers. To approach this matter, a novel technique was developed in which the strength in between layers was …

New developments of short and continuous fibre printing with exceptional mechanical behaviour and unique functionalities

by Cesar Stupp, Brightlands Materials Center Additive manufacturing (AM) techniques have been extensively explored in the last decades due to their potential to transform existent production technologies. Fused filament fabrication (FFF) is a very versatile AM technique, although it is widely used for prototyping due to their limited mechanical properties, especially in between layers. To …

3D Printing Event 2019 edition summary

On April 16 and 17, 2019, Brightlands Chemelot Campus in Sittard-Geleen, The Netherlands, hosted a two-day 3D Printing Event covering the entire Additive Manufacturing value chain, from 3D Printing design to factory integration and post-processing. The event included five dedicated conferences, where over 30 speakers from reputed companies and research institutions shared their views, and …